Amplifers - style

Go to content

Main menu:


Products > AUDIO- VIDEO
Crown 2,000 watt Amplifier with Custom DSP Settings
Item#: CR-CDi2000-LSCAPE
Number of Channels: 2
Power Rating: 800w per Channel @70V, 475w per channel @8Ω, 800w @4Ω, 1000w @2Ω.
Impedance: Pre-programmed with Episode Landscape Series Optimized Settings
User Customizable: Yes
Connection Interface: USB - Type B (Cable Not Supplied)
Voltage Input: 100V, 120V, 220-240V, 50/60Hz
Input Connection Type: Two 3-pin removable Phoenix-type connectors that accept a balanced line-level input
Output Connection Type: 4-position barrier strip with connectors
Crossover Filters: Highpass and Lowpass per Channel
Output EQ: 8 parametric filters per Channel with Adjustable Q
Delay: Up to 50 msec per Channel
Output Limiter: -3, -6, or -12 dB per Channel
Dimensions: Width: 19" Height: 3.5" Depth: 12.5"
Weight: 22 lbs.

Episode® Digital Subwoofer Amplifier with Front Panel Display - 500W
Item#: EA-AMP-SUB-1D-500R
Continuous Power Output :-250 watts RMS at 8 ohms
500 watts RMS at 4 ohms (< 0.5% THD)
Input Sensitivity :-100 mV for 500W output 4 ohms
Input Impedance -15,000 ohms
S/N Ratio - 88 dB (5 kHz bandwidth relative to 500W @ 4 ohms)
Frequency Response -1.1dB at 300 Hz (Flat EQ, LFE Crossover Setting)
-1.5dB at 20 Hz
Distortion < 0.2%
Auto On Sensitivity < 5.5 mV (Left)
< 22 mV (Right)
External Trigger Voltage 12V +/-1.2V no load
10.5 V with 100 mA load
12V Trigger Threshold 2.6 V
Current Limit Theshold 2.7 ohms (4 ohm minimum nominal speaker load)
Front End Overload 3.6 V RMS (L + R, 20 Volume, 40 Hz Signal, Flat EQ, LFE Crossover)
Dimensions 16.9" W (19" including rack mounts)
1.75" H (2.1" including feet)
8.1" D (front switch to rear chassis)
8.9" D (front switch rear speaker connector)
Weight 8.5 lb
Certification TUV Listed and tested under UL/EN60065 for US and Canada

Episode® 2-Channel Mini-Amplifier with Tube IR Sensor and Remote Control
Continuous Power Output
(Both channels driven) 26 watts RMS at 8 ohms
35 watts RMS at 6 ohms
35 watts RMS at 4 ohms
Input Sensitivity Analog: Gain:29dB Digital: Gain:40dB(Vrms/FS)
4 ohms: 420mV 4 ohms: -20dBFS
6 ohms: 500mV 6 ohms: -18dBFS
8 ohms: 500mV 8 ohms: -18dBFS
Input Impedance RCA Analog input: 20K ohms
Analog: 77dB
S/N ratio Digital Optical: 90dB
Frequency Response (Speaker) 20 Hz to 20 kHz
Frequency Response (Sub) 20 Hz to 500 Hz
Distortion Less than 1% THD+N 20Hz - 20 kHz, 22KHz BW
IR Input Jack / Operation Voltage 1/8” 3.5mm / 12 VDC
IR Output Jack / Operation Voltage 1/8” 3.5mm / 12 VDC
AC Main Inputs 100-240V ~ 50/60Hz 1.6A
Power Consumption Typical Power: 60 watts
Max Power: 100 watts
Dimensions Width: 5.4” Height: 2” Depth: 6.8”
Weight 2.5 lbs.
Certification EMC, FCC, UL
Episode® 70 Watts per Channel Digital Amplifier (12 Channels - 2U Size - Audio Sense - Global A/B Inputs)
Item#: EA-AMP-12D-70A
Power Rating
(Watts / Channel) 70 Watts / Channel / 4 Ohms
50 Watts / Channel / 8 Ohms
Number of Channels 12
Construction Digital, Class D
Dimensions Width: 17” Height: 4” Depth: 13”
Rack Spacing 2U
Weight 32
Ratings / Certifications ETL 2000772, CE, FCC Part 15
Power Consumption (G.E.M, Energy Star) 1100W (GEM)
Operating Voltage 115-230VAC, 50/60Hz, 1100W

Back to content | Back to main menu